For over 70 years, Metro Hydraulic Jack Company, a third-generation, family-owned and operated business, has been providing industrial hydraulic parts and equipment services to commercial, automotive, marine, refuse, and construction industries.
More About Our Company
10000 psi, 3/8" ports, 5 gpm max flow rate.
Application: Single acting cylinders.
Actuation: Solenoid operated: 24 volt, 50/60 Hz.
Functions: “Advance”, “hold” and “return” positions. When in “advance”, solenoid “B” is energized and oil goes from pump to cylinder through pressure port. In “return” position, solenoid “A” is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in “hold” position, oil from pump is directed back to reservoir while oil is checked in cylinder. The “Posi-Check” feature holds load when shifting from “advance” to “hold” position.
Used on these pumps: Furnished with pilot lines and adapters for PE55, PE30(carrying handles must be removed) and PE120 series. For application on other models, consult factory.
Valves above are shipped without controls. Use 202777 remote hand control. Consult factory for field installation.
To prevent sudden, uncontrolled descent of a load as it is being lowered, use a No. 9596 Load Lowering Valve or No. 9720 Counter Balance Valve in conjunction with the directional valve used in your application.
When ordering any valve for a PE30 or PG30 series pump, 1/2" longer mounting screws are required. For valves 9599 order four 251078 cap screws.
Application: Single acting cylinders.
Actuation: Solenoid operated: 24 volt, 50/60 Hz.
Functions: “Advance”, “hold” and “return” positions. When in “advance”, solenoid “B” is energized and oil goes from pump to cylinder through pressure port. In “return” position, solenoid “A” is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in “hold” position, oil from pump is directed back to reservoir while oil is checked in cylinder. The “Posi-Check” feature holds load when shifting from “advance” to “hold” position.
Used on these pumps: Furnished with pilot lines and adapters for PE55, PE30(carrying handles must be removed) and PE120 series. For application on other models, consult factory.
Valves above are shipped without controls. Use 202777 remote hand control. Consult factory for field installation.
To prevent sudden, uncontrolled descent of a load as it is being lowered, use a No. 9596 Load Lowering Valve or No. 9720 Counter Balance Valve in conjunction with the directional valve used in your application.
When ordering any valve for a PE30 or PG30 series pump, 1/2" longer mounting screws are required. For valves 9599 order four 251078 cap screws.
Unit of Measure
Valve Type |
N/A3 - Way, 3 Position Tandem Center |
Actuation |
N/ASolenoid operated |
Pressure Rating |
N/A10000 psi |
Max. Flow Rate |
N/A5 GPM |
Port Size |
N/A3/8 inches |
Function |
N/AAdvance/Hold ReturnPosi Check Feature |
Operation |
N/APilot Operated Solenoid |
Application |
N/ASingle Acting Cylinder |
用在泵s |
N/APE30PE55PE120 |
AC Voltage |
N/A24 V |
Power supply |
N/A24 volt, 50/60 Hz |
Weight |
N/A14.0 lbs. |
Ship Weight |
N/A14.6 lbs. |