Print Back
  • High performance in compact package. Electric and battery powered models for powering tools and cylinders upto 25 ton.
  • Portable power source for hydraulic cylinders and tools.
  • Permanent magnet motor starts easily under load, even with reduced voltage conditions.
  • Pumps for 3000 psi and 5000 psi operating pressures available.
  • Battery-operated models have 8 foot power cord with alligator clips to connect to any 12 volt battery.
  • Optional rechargeable battery pack with shoulder strap for maximum portability.
  • Pump typically delivers 15 minutes of continuous operation at 10000 psi on a single battery.
  • Pump can be operated in any position.
  • 24 volt hand and foot switches available for all AC powered pump models.
  • High-impact housing with flame-retardant construction.
  • Base mounting holes for fixed installations.
    dBa在3英尺的距离,测量。
    “Advance” position holds pressure with motor shut off. “Return” position advances cylinder with motor running and returns cylinder with motor shut off.
    High pressure flow on 5000 psi unit is 20 cu. inch./min. Flow on 3000 psi unit is 30 cu. inch./min. Consult factory for further information.
    Amp draw at 10000 psi; 6 amp at 115 volt, 3 amp at 230 volt, and 25 amp at 12 volt.
Unit of Measure

Specifications

For Use With

N/ASingle Acting

Description

N/ABase model pump with 1/4 hp motor. Bladder type reservoir, 110 volt power required.

Valve Function

N/AAdvance Return (Auto.)

Reservoir Usable Capacity

N/A60 cu. inch

Valve Type

N/A2–Way/Auto. Dump

Valve No.

N/A9561

Speed

N/A2

Control Switch

N/ARocker Type off, Momentary on

Motor

N/A1/4 hp, 110/115V 50/60 Hz, Single Phase

Power supply

N/A110/115 volt, 50/60 Hz

dBa Pressure Output

N/A10000 psi

Idle and 10000

N/A68-74 psi

Oil Delivery at 0-40 psi

N/A120 cu. inch/min

Oil Delivery at 10000 psi

N/A10 cu. inch/min

Length

N/A13 inches

Width

N/A7.75 inches

Height

N/A8 inches

Product Weight With Oil

N/A20 lbs.

Ship Weight

N/A24.2 lbs.

PE-10 Series, Electric Hydraulic Pump Note

N/APE102,PE102-220,PR102- "Advance" position holds pressure with motor shut off. "Return" position advances cylinder with motor running and returns cylinder with motor shut off.

    Baidu